RS232 Port Parameters
To change these settings, press
<#2806#><#2807#>〈<#2807#>Help<#2808#>〉<#2808#><#2806#>
and select <#2810#>[RS232]<#2810#> from
the <#2812#>[Settings]<#2812#> menu. Following parameters can be changed:
- Baud
- ~
selects the rate for the serial port.
- Flowcontrol
- ~
selects the flowcontrol mode, these
functions are implemented by the BIOS.
- Parity
- ~
selects the parity mode, these modes are
implemented by the BIOS3.1.
- Databits
- ~
allows you to select the number of data
bits, implemented by the BIOS.
- Stopbits
- ~
allows you to select the number of
stop bits, implemented by the BIOS.
- Mode
- ~
allows you to put the terminal in one of following
modes:
- <#2832#>[Full]<#2832#>
- #tex2html_wrap_inline10245#
- <#2834#>[Echo]<#2834#>
- #tex2html_wrap_inline10249#
- <#2836#>[Local]<#2836#>
- #tex2html_wrap_inline10252#